Scientific papers - Annals of "Dunarea de Jos" University of Galati - Analele științifice ale Universității "Dunărea de Jos" din Galați: Recent submissions
Afișează articolele 41-60 of 1845
-
Alumina Powder Properties Obtained by Neutralization Process of Sodium Aluminate
(Universitatea "Dunarea de Jos' din Galați, 2009)Today, the most production of alumina is used for aluminum production [1, 2] (metallurgy alumina), minor production of alumina is used for special purpose, as fire-resistant materials, electro porcelain and etc., and ... -
Mathematical Model Cooling Agglomeration Ferrius in Layer
(Universitatea "Dunărea de Jos" din Galați, 2009)Mathematical model is based on discretization agglomeration areas layer deposited on very small. The τ Δ cooling time and the elements of space and elements xi time relationship is discretization as volume control. Based ... -
Optimisation of Refractory Components of Sliding Gate Mechanism for Continuous Casting
(Universitatea "Dunărea de Jos" din Galați, 2009)New design techniques have been developed to optimize refractory components of sliding gate mechanism for continuous casting of steel. The overall objective is to increase CC productivity as well as steel quality by using ... -
Development of Blade Design for Small Hawt Adapted for Lower Values of Wind Speed
(Universitatea "Dunărea de Jos" din Galați, 2009)The paper aims at studing, theoretically and experimentally, the influence of turbines blade profile on output power, in order to decrease effective domain to smaller wind speed, specific to Galati area. Studies have ... -
Obtaining and Characterisation of Thermoresistive Pigments
(Universitatea "Dunărea de Jos" din Galați, 2009)The paper describes the obtaining and chemical and physico-structural characterisation of a green thermoresistive pigment. The pigment is made of ZnO dopped with Sb, Bi, Cr, Co and Fe oxides and it is used at mosaics and ... -
Experimental Research Regarding the Obtaining of Obtaining of Friction Elements
(Universitatea "Dunărea de Jos" din Galați, 2009)Friction materials are used as bimetallic friction elements, consisting of a friction material layer sintered on a steel backing. Using the electron microscopy techniques (microprobe analyzer) some of the diffusion ... -
Corrosion Behaviour of Tombac Used in Cult Objects Manufacturing
(Universitatea "Dunărea de Jos" din Galați, 2009)Corrosion of metals and metallic alloys is due to their thermodynamic instability in relation to their oxidation form. Corrosion tests performed in this work simulate the exposure conditions in different environments of ... -
Variation of Mechanical Characteristics for Thin Wall Tubes Processed in Ultrasonic Field
(Universitatea "Dunărea de Jos" din Galați, 2009)The paper presents the variation of mechanical characteristics of resistance and plasticity for thin wall tubes made of stainless steel 10TiNiCr180, processed in ultrasonic field. Decrease of mechanical characteristics ... -
Redesigning a Jaw Crusher Using Value Analysis. Part II
(Universitatea "Dunărea de Jos" din Galați, 2009)The paper presents a complete study of VALUE ANALYSIS applied concretely to a selected piece of equipment. The phases and ITERATIVE operation of the Value Analysis method are presented. Value Analysis combines both ... -
The temperature Effect on Severely Deformed Aluminium by High Pressure Torsion
(Universitatea "Dunărea de Jos" din Galați, 2009)The process of deforming materials started to attract the interest of the researchers after the development of the severe plastic deformation techniques. A number of aluminium samples were severe deformed by HPT method ... -
Establishing the Constitutive Law of a CrMo Alloyed Steel
(Univrsitatea "Dunărea de Jos" din Galați, 2009)The paper shows the results of the researches for establishing the equation of the deformation behavior of alloyed steel with chromium and molybdenum. The behavior law is established in the experimental way, using the ... -
Study of Zro2/Co-Deposition with Cobalt from Chloride Electrolyte
(Universitatea "Dunărea de Jos" din Galați, 2009)The metal-matrix composites are materials in which the properties of a metallic host material are modified with addition of a second phase (ceramics) by electrodeposition process. The second phase can be hard oxides or ... -
Researches on the Corrosion Behavior for a Drawing Steel That Went Through Natural Ageing
(Universitatea "Dunărea de Jos" din Galați, 2009)The paper presents the results of a study on the corrosion behaviour of the sheets of drawing steel with 0,04% C gone through natural ageing and run for a period of 112 days from the moment of drawing. The researches ... -
On the Corrosion Behavior of Organic Nanocomposite Coatings
(Universitatea "Dunarea de Jos" din Galați, 2009)Recently, researches on composite coatings of organic nature with the addition of metallic oxide nanopowders have shown an increasing corrosion resistance of metallic materials. Carbon steel shows an improved behavior ... -
Morphological Aspects and Corrosion Behaviour of Phenol Formaldehyde/Zn Composite Coatings
(Universitatea "Dunărea de Jos" din Galați, 2009)The present work has the purpose of studying morphological aspects and corrosion behaviour of pure zinc and composite coatings having zinc as metal matrix and phenol – formaldehyde resin type Novolac (RESITAL 6358/1) ... -
X-Ray Diffraction Analysis at Ultrasonic Welding
(Universitatea "Dunărea de Jos" din Galați, 2009)In the article [2] the author present experimental investigations regarding of residual stress distribution in weld bead vicinity of submerged arc welded naval plates. In this way, residual stresses from vicinity of weld ... -
The Mechanism of Phase Transformation to Obtain Zinc-Iron Coatings
(Universitatea "Dunărea de Jos" din Galați, 2009)Important changes in the ratio of constitutive phases take place during heating of galvanized parts due to Zn coating layer changed into Zn-Fe alloy. The work deals with a mathematical correlation between diffusion ... -
Influence of Technological Parameters on the Evolution of Nickel Films Deposited by Electrolysis
(Universitatea "Dunărea de Jos"din Galați, 2009)The influence of technological parameters on the structure of nickel layers electrodeposited on a copper substrate in a Watts bath has been studied. The complex influence of current densities, temperature and pH values ... -
Rapid Synthesisof ZnO Micro and Nanostructures
(Universitatea "Dunărea de Jos" din Galați, 2009)This paper focuses on the newer chemical synthesis of zinc oxide powders and the effects of reaction temperature and possible mechanism of ZnO formation. The study of the reaction mechanism at different temperatures has ... -
Preliminary Investigations Concerning Monitoring of Water Pollution Level
(Universitatea "Dunărea de Jos" din Galați, 2009)The aim of this paper is to develop an effective tool based on artificial intelligence techniques for monitoring and characterization of surface waters. Monitoring of the pollution in the aquatic environment consists in ...