Simple Approach for Induction Motor Control Using Reconfigurable Hardware

dc.contributor.author	Imecs, Maria
dc.contributor.author	Incze I., Ioan
dc.contributor.author	Szabó, Csaba
dc.date.accessioned	2015-12-14T08:48:18Z
dc.date.available	2015-12-14T08:48:18Z
dc.date.issued	2002
dc.identifier.issn	1221-454X
dc.identifier.uri	http://10.11.10.50/xmlui/handle/123456789/3737
dc.description	The Annals of "Dunarea de Jos" University of Galati Fascicle III, 2002	en_US
dc.description.abstract	The paper deals with rotor-field-oriented vector control structures for the induction motor drives fed by the so-called tandem frequency converter. It is composed of two different types of DC-link converters connected in parallel arrangement. The larger-power one has current-source character and is operating synchronized in time and in amplitude with the stator currents. The other one has voltage-source character and it is the actuator of the motor control system. The drive is able to run also with partial-failed tandem converter, if the control strategy corresponds to the actual operating mode. A reconfigurable hardware implemented in configurable logic cells ensures the changing of the vector-control structure. The proposed control schemes were tested by simulation based on Matlab-Simulink model.	en_US
dc.language.iso	en	en_US
dc.publisher	"Dunarea de Jos" University of Galati	en_US
dc.subject	Frequency converter	en_US
dc.subject	Induction motor	en_US
dc.subject	Field-orientation principle	en_US
dc.title	Simple Approach for Induction Motor Control Using Reconfigurable Hardware	en_US
dc.type	Article	en_US